MountingChapter 3INSTALLATION442 Screw the right and left sides of SCA-WL10 to fix it.Note. For more information about mounting into 19-inch rack, refer to “Mounting Into19-Inch Rack” on page 44.Mounting Into 19-Inch RackThe following explains the procedures for mounting into 19-inch rack.l Ask several installers to do this task for safety purposes.l Of rack mount brackets (attached on the front), the resistance to earthquakesis 0.5G. It is also necessary to consider it on the rack side.* To provide recommended racks with 1.1G, use optional mount brackets for rearmodule [1U BRANCKET(E)]. The recommended racks are SV70 RACK (35U)NR-581916-001 and SV70 RACK (39U) NR-581914-001.1 Attach rack mount brackets (attached) to the right and left sides of WLController. Use a Phillips driver to screw them.Phillips driverEther1100M LINK 100M LINKEther2PWR ACTALM LOAD
