W415-1705 / A / 07.13.17EN44finishing11.5 safety screen & glass door installation / removal! WARNING• Glass may be hot. Do not touch glass until cooled.• If equipped with door latches that are part of a safety system, they must be properly engaged. Do notoperate the appliance with latches disengaged.• Facing and/or finishing materials must not interfere with air flow through air openings, louvre openings,operation of louvres, or doors/access for service. Observe all clearances when applying combustiblematerials.• Before door is removed, turn the appliance off and wait until appliance is cool to touch. Doors are heavy andfragile so handle with care.47.1A barrier designed to reduce the risk of burns from the hot viewing glass is provided with theappliance and must be installed.Before the glass door can be removed, the safety screen must be removed. Lift the safety screen off the fourshoulder screws and remove from the appliance.Leave a hand on the glass door during entire door removal. The glass door is secured to the firebox with four(BL36-1) or six (BL46) spring latches. Pull the handles of the latches forward, then lift/lower the latches out fromthe door frame to release the door. Next, lift the door up until the bottom edge clears the bottom shoulder screwsof the appliance. Carefully grip the topand bottom of the door lifting it off theappliance.Reverse these steps to re-install the doorand safety screen. Ensure safety screenis installed correctly.BL46 illustrated.These spring latches make up the springrelief system for the appliance. Ensurethe door opens freely and closes sealed.note:When mounting the door, ensure thereis equal space on both the left and theright side. This allows for easy installationof the front.note: