Appendix A Specifications for VXI-MIO-64XE-10National Instruments CorporationA-13VXI-MIO Series User ManualAnalog OutputOutput CharacteristicsNumber of channels .......................... 2 voltageResolution ......................................... 16 bits, 1 in 65,536Max update rate................................. 100 kS/sType of DAC .................................... Double-bufferedFIFO buffer size ................................ 2,048 samplesData transfers .................................... DMA, interrupts, programmedI/OTransfer CharacteristicsRelative accuracy (INL) .................... ±0.5 LSB typ, ±1 LSB maxDNL .................................................. ±1 LSB maxMonotonicity..................................... 16 bits, guaranteedOffset errorAfter calibration.......................... 305 μV maxBefore calibration ....................... 20 mV maxGain error (relative to internal reference)After calibration.......................... ±30.5 ppm maxBefore calibration ....................... ±2,000 ppm maxVoltage OutputRange ................................................ ±10 V, 0 to 10 V(software selectable)Output coupling................................. DCOutput impedance ............................. 0.1 Ω maxCurrent drive ..................................... ±5 mAProtection ......................................... Short-circuit to groundPower-on state................................... 0 V (± 20 mV)Dynamic CharacteristicsSettling time for full-scale step.......... 10 μs to ±1 LSB accuracySlew rate ........................................... 5 V/μsNoise ................................................. 60 μVrms, DC to 1 MHz
