ABSYNTH 5 Reference Manual – 14910.5.2 VolumeHere you can set how ABSYNTH 5 uses incoming information from a volume pedal or anotherMIDI control source as a level control.• CC control: Here enter the number of Controllers that you want to use for control of theentire level; in the standard setting, ABSYNTH 5 reacts using Control Change #7, desig-nated in the MIDI specification the control of the total level.• Pre/Post Toggle: Determines whether changes in the level should come before or afterthe Master Channel.• Macro Control menu: If you want to make the entire output level dependent upon thesignal value of a Macro Control, you can select a Macro Control from the Macro Controlmenu.• Depth control: Determines the strength with which the incoming control information influ-ences the level.• Lag: Establishes the delay before ABSYNTH 5 reacts to changes in the signal value re-sponsible for the level control.10.5.3 PanMacro Controls 15 and 16 (both of which are combined with an XY control) are designedto control the Panorama Position by simultaneously placing the output signal on a left-rightaxis and front-back axis. In order to use a two-axis controller like a joystick or a touch pad toadjust the panorama position, learn the instrument as described in section 10.3 “ControllersPage”. For control of the Panorama you can also determine the strength of the control signal(Depth control) and the hesitation in the assessment (Lag control).
