ABSYNTH 5 Reference Manual – 53• Save Channel Template: Allows you to save the current Channel settings as a Template inthe Universal Library. In the dialog that opens, choose the name and saving location forthe Template, then click then on “OK” to save the Template.• Mutate Oscil: Applies a Mutation to that particular Oscillator.• Retry Mutate Oscil: Retries the Mutation for that particular Oscillator.For the last two entries, the Mutation settings are those defined in the Browser’s Mutatonsection (see section 11.3, “Mutator”, for more on this).5.4.3 Single ModeOscillator in Single modeIn the Single mode, a single main oscillator is active.The Main panel contains all parameters controlling the main oscillator:• Synthesis menu: Selects the desired synthesis process (see section 5.4.1 “Oscillator’sPanels and Tabs” above for details).• Waveform Selector: A click on the Waveform Selector opens the Waveform Selection dia-log where you can select the Waveform for the Oscillator (see section 5.3.1, “WaveformSelector and Waveform Selection dialog”, above for details).• Anti-Alias switch: Turns the anti-aliasing on and off (see section 5.3.3 “Anti-Alias Switch”above for details).• Frequency menu and Frequency control: Enables you to enter the oscillator’s frequency asa transposition of the played note (Trans), as a relationship (Ratio) with the played note,as a fixed Frequency (Hz) or via a fixed MIDI note (Note). See section 5.3.2, “FrequencyMenu and Frequency Control”, above for details.
