ABSYNTH 5 Reference Manual – 16811.3.2 Mini-Patch ViewMini Patch viewIn the left part of the Mutation section, the Mini-Patch view is a small representation of yourcurrent patch with all its modules, as they are in the Patch Window.The Mini-Patch view allows you to select the components that you want to include in themutation process.The ModulesEach module of the Mini-Patch view can have three states:• Totally dimmed: The module is deactivated in the Patch Window. Therefore, it cannot beincluded in any mutation process.• Border highlighted only: The module is active in the Patch Window but does not take partin the mutation process.• Whole component highlighted: The module is active in the Patch Window and also in-cluded in the mutation process.The active modules (included or not in the mutation process) are labeled so that you canrecognize them easily:• At the top, the three Oscillators are denoted by the letters A, B or C of their respectiveChannels.• Below, the Filters, Modulators or Waveshapers of each Channel are denoted by the num-bers 1 or 2 according to their place within that Channel.• At the bottom, in the Master Channel, the first two modules are labeled with M1 and M2(“M” for Master) and the last module with FX.You can select the modules to include or exclude within/from the mutation process by click-ing on them to toggle their state.
