8.2.5 Kick – RasperThe Rasper kick is an acoustic bass drum emulation providing a unique and organic sound thatcan be easily adapted into Drum’n’Bass or Dubstep productions. Its two crispness modes allowfor a wide range of bass drums.The parameters described below are presented as they appear in the Control area (Ar-range view). The same parameters are available in the Plug-in panel within the Plug-inStrip (Mix view). See ↑12.4, The Plug-in Strip for more information on this.Main PageElement DescriptionMAIN SectionEngine Selects the engine used in the Kick Plug-in. If you change thissetting, please refer to ↑8.2, The Kicks.Tune Adjusts the pitch of the drum played by the middle C, measured inMIDI note numbers and cents. Available values range from 38.00 to62.00. The default value is 50.00. For more details see ↑8.1.5,Pitch Range, Tuning, and MIDI Notes.Decay Adjusts the duration of the sound’s tail, measured as a percentage.Available values range from 0.0 to 100.0 % (default: 50.0 %).Punch Simultaneously adjusts the amount of the pitch envelope and theamount of noise of the attack. Available values range from 0.0 to100.0 % (default).Impact Adjusts how hard the drum is hit. Available values range from0.0 % (softest) to 100.0 % (hardest). The default value is 75.0 %.CRISPNESS SectionMode Selects from two different crispness modes: Select A (default) for atambourine-like sound, and select B for a snare-like sound.Using the DrumsynthsThe KicksMASCHINE - Manual - 351
