Element DescriptionSCALE SectionVelocity Adjusts the velocity response of the drum. Available values rangefrom -100.0 % to 100.0 % (default value). At zero (mid course),the drum is played at full velocity, no matter how hard you hit thekeys (or pads). From that mid position, by turning the knob to theright you increase the positive velocity response and make the drummore and more sensitive to the velocities at which you hit the keys/pads. From the mid position, turning the knob to the left as theinverse effect: the harder you hit the key/pad, the softer theresulting drum sound will be.8.6.3 Percussion – ShakerThe Shaker is a versatile electronic shaker/maraca engine.The parameters described below are presented as they appear in the Control area (Ar-range view). The same parameters are available in the Plug-in panel within the Plug-inStrip (Mix view). See ↑12.4, The Plug-in Strip for more information on this.Main PageElement DescriptionMAIN SectionEngine Selects the engine used in the Percussion Plug-in. If you changethis setting, please refer to ↑8.6, The Percussions.Tune Adjusts the center frequency of the filter applied to the noisesource, which will define the pitch of the drum played by themiddle C, measured as a percentage. Available values range from0.0 % to 100.0 % (default: 50.0 %). For more details see ↑8.1.5,Pitch Range, Tuning, and MIDI Notes.Using the DrumsynthsThe PercussionsMASCHINE - Manual - 408
