7.1 Audio Routing in MASCHINEMASCHINE offers a powerful audio routing system that you can finely customize to fit yourspecific needs.To make it short, by default the various channels of MASCHINE are structured in a simple, hi-erarchical way:▪ At the bottom level, each Sound has its own channel. The output of the Sound’s channel issent to its parent Group.▪ At the mid-level, each Group has its own channel, which sums all channels of the includedSounds. The output of the Group’s channel is sent to the Master.▪ At the top level, the Master has its own channel, which sums the channels of all Groupsand ends up at the main output of MASCHINE. The output of the Master’s channel is sentto your amplification system (in stand-alone mode) or to your host application (in plug-inmode).This default basic configuration can be customized in numerous ways. Using the audio settingsavailable in the Input and Output properties at the Sound, Group, and Master level, you canbuild complex routings that cover a wide range of situations, as you will see in the next sec-tions:▪ Feed external audio to the input of your Sounds: ↑7.1.1, Sending External Audio toSounds.▪ Adjust the main output of your Sounds and Groups, and route it to various destinations:↑7.1.2, Configuring the Main Output of Sounds and Groups.▪ Send auxiliary outputs of your Sounds and Groups to other destinations: ↑7.1.3, Setting UpAuxiliary Outputs for Sounds and Groups.▪ Choose the destination and settings for the Master output (MASCHINE’s main output) aswell as for the Cue bus used for pre-listening: ↑7.1.4, Configuring the Master and Cue Out-puts of MASCHINE.Audio Routing, Remote Control, and Macro ControlsAudio Routing in MASCHINEMASCHINE 2 - Manual - 295
