Parameter DescriptionGain Adjusts the input level of the side-chain signal fed into the Plug-in.FILTER SectionFilter Activates a filter on the side-chain input. This filter can be useful toselect only a specific frequency range of the side-chain signal tocontrol the Plug-in.Center Freq Adjusts the center frequency of the filter.Width Adjusts the bandwidth of the filter.On your controller the outputs available in the SOURCE parameter are labeled as in thedisplay of the Source selector described above.For more information on how to use the side-chain input, please refer to section↑10.1.3, Using the Side-Chain Input.Input Level Meter in the Gate Panel (Plug-in Strip)In the Plug-in Strip, the Gate panel offers an extra feature not available in the Control area:The Threshold fader (corresponding to the Threshold parameter of the Main page in the Controlarea) provides a level meter for visual monitoring of the input level. By comparing this inputlevel with the position of the Threshold fader, you can easily see you which parts of the signalwill pass through the Gate.11.1.3 Transient MasterThe Transient Master allows you to emphasize or attenuate the transients of your audio materi-al by modifying the envelopes of every attack and sustain phase. For example, by increasingthe attacks of a snare or a kick, you can build powerful percussive sounds without running therisk of damaging their natural sounding. Unlike other dynamic effects (compressors, limiters,etc.), the Transient Master does not use the input signal level to decide when to come into ef-Effect ReferenceDynamicsMASCHINE 2 - Manual - 489
