6. Press Button 7/8 to select the desired Plug-in slot.The name of the selected Plug-in appears in the field between the left and right arrowsunder Button 7 and 8. If there are no Plug-ins in the channel this will read (NONE).7. Press SHIFT + Button 5 (BYPASS) above the right display to bypass the correspondingPlug-in slot.→ The Plug-in is bypassed and does not affect the sound anymore. When you hold SHIFT,Button 5 is fully lit and the BYPASS label on the right display is highlighted to indicatethat this Plug-in slot is now bypassed:Use the same method to unmute the effect:► To unmute the effect, press SHIFT + the lit Button 5 (BYPASS).In most cases the first Plug-in slot contains an Instrument Plug-in (e.g., a Sampler). Becareful: bypassing the slot will mute the whole Sound!6.1.6 Using Side-ChainSome Plug-ins provide side-chaining. This allows you to control their influence on the audio viaanother audio signal sent to their secondary, side-chain input. This extra routing feature is de-scribed in details in section ↑11.1.3, Using the Side-Chain Input.6.1.7 Moving Plug-insMASCHINE allows you to move Plug-ins across the Plug-in List and across Sounds and Groups.Working with Plug-insPlug-in OverviewMASCHINE - Manual - 278
