For more information on how to trigger MASCHINE 2 sounds via MIDI Notes in a hostSequencer refer to this Knowledge Base Article: http://www.native-instruments.com/knowledge/questions/1780/.8.2.2 Triggering Scenes via MIDIThe MASCHINE hardware SCENE mode can be configured to send out MIDI (Notes/ProgramChanges) which can be used to trigger scenes. When MASCHINE runs as a Plug-in this MIDIdata is sent to the host application. When MASCHINE runs as a stand-alone application thisMIDI data is send out to all activated MIDI output devices.MIDI Scene Change program change messages can be used to record a Scene performance toa host application, and all recorded Scene performances can be then be saved within yourDAW and sent back to MASCHINE for playback and trigger Scenes in the recorded order.To send MIDI Scene Change messages:1. Click the cog wheel Icon in the Header of the MASCHINE software.2. Select MIDI Scene Change.3. Click Program Change.► MASCHINE will send Program Change messages when Scenes are triggered from the MA-SCHINE hardware SCENE page.Audio Routing, Remote Control, and Macro ControlsUsing MIDI Control and Host AutomationMASCHINE - Manual - 446
