2. Click the headphone icon in the Master header.→ The Master channel strip switches to the Cue channel strip. Here you can adjust the Cuechannel’s level and panoramic position, along with the destination you want to send theCue channel to. As destination, choose for example another output pair into which youwill have plugged your headphones. These settings are described in section ↑8.1.4, Con-figuring the Master and Cue Outputs of MASCHINE.9.3 The Plug-in ChainIn the middle of the Mix view, right under the Mixer, you see an horizontal bar listing all Plug-ins loaded in the focused channel: the Plug-in Chain. In the Plug-in Chain, Plug-ins are ar-ranged into an horizontal series, the audio travelling from left to right through each Plug-in ofthat channel.A Plug-in Chain with the Compressor selected and the EQ bypassed.Except for its horizontal layout, the Plug-in Chain has the same functionality as the Plug-inList found in the channel strips of the Mixer above — namely to organize the Plug-ins of thatchannel:▪ Click a Plug-in name to select it. If this Plug-in is currently hidden in the Plug-in Strip un-derneath, it automatically scrolls to show the interface of that Plug-in.▪ Click the little “+” icon at the end of the chain and select a Plug-in in the Plug-in menu toload it at the end of the chain, or right-click (Mac OS X: [Ctrl]-click) a Plug-in name to re-place this Plug-in with another one. See section ↑6.1.3, Loading, Removing, and Replacinga Plug-in for more information.Controlling Your MixThe Plug-in ChainMASCHINE - Manual - 484
