Element DescriptionSCALE SectionVelocity Adjusts the velocity response of the drum. Available values rangefrom -100.0 % to 100.0 % (default value). At zero (mid course),the drum is played at full velocity, no matter how hard you hit thekeys (or pads). From that mid position, by turning the knob to theright you increase the positive velocity response and make the drummore and more sensitive to the velocities at which you hit the keys/pads. From the mid position, turning the knob to the left as theinverse effect: the harder you hit the key/pad, the softer theresulting drum sound will be.10.5.3 Tom – FloorThe Floor Tom is an acoustic tom that provides the emulation of a complete set of toms. Al-though it is more suitable for floor and low toms, it is also capable of producing interestingmid and high toms. Furthermore the control over the pitch bend and the mute parameters al-low for a wide range of sounds.The parameters described below are presented as they appear in the Control area (Ar-range view). The same parameters are available in the Plug-in panel within the Plug-inStrip (Mix view). See ↑9.4, The Plug-in Strip for more information on this.Main PageElement DescriptionMAIN SectionEngine Selects the engine used in the Tom Plug-in. If you change thissetting, please refer to ↑10.5, The Toms.Tune Adjusts the pitch of the drum played by the middle C, measured inMIDI note numbers and cents. Available values range from 48.00 to62.00. The default value is 48.00. For more details see ↑10.1.5,Pitch Range, Tuning, and MIDI Notes.Using the DrumsynthsThe TomsMASCHINE - Manual - 565
