IP Setup 10-25Note: The remote DHCP server(s) to which the Netopia Router is relaying DHCP requests must be capable ofservicing relayed requests. Not all DHCP servers support this feature. For example, the DHCP server in theNetopia Router does not.The DHCP server(s) to which the Netopia Router is relaying DHCP requests must be configured with one or moreaddress pools that are within the Netopia Router’s primary Ethernet LAN subnet. (There is no mechanism forDHCP clients to receive an address on a secondary subnet via a relayed DHCP request.)Connection ProfilesSince you will probably only have a single connection to your ISP over the DSL link, you may not need to createmultiple connection profiles. Additional profiles may be useful for creating VPNs.Connection Profiles define the line and networking protocols necessary for the router to make a remoteconnection. A connection profile is like an address book entry describing how the router is to get to a remotesite, or how to recognize and authenticate a remote user connecting to the router. To create a new ConnectionProfile, you navigate to the WAN Configuration screen from the Main Menu, and select Add Connection Profile.The Add Connection Profile screen appears.On a Netopia 4752 SDSL Integrated Access Device you can add up to 15 more connection profiles, for a total of16, although only one can be used at a time, unless you are using VPNs.MainMenuWANConfigurationAdd ConnectionProfileAdd Connection ProfileProfile Name: Profile 1Profile Enabled: YesData Link Encapsulation... PPPData Link Options...IP Profile Parameters...COMMIT CANCELConfigure a new Conn. Profile. Finished? COMMIT or CANCEL to exit.
