WAN and System Configuration 9-21To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.Follow these steps to change a parameter’s value:1. Select the parameter you want to change.2. Select a new value for the parameter. Return to step 1 if you want to configure another parameter.3. Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parametersunchanged and exit the Console Configuration screen.SNMP (Simple Network Management Protocol)These screens allow you to monitor and configure many of the data routing features of your network by meansof a standard Simple Network Management Protocol (SNMP) agent. Details are given in “SNMP” on page 14-13.SecurityThese screens allow you to add users and define passwords on your network. Details are given in “Security” on page 13-1.Upgrade feature setYou can upgrade your Netopia 4752 by adding new feature sets through the Upgrade Feature Set utility.See the release notes that came with your device or feature set upgrade, or visit the Netopia Web site atwww.netopia.com for information on new feature sets, how to obtain them, and how to install them on yourNetopia 4752.Console ConfigurationBaud Rate... 57600Hardware Flow Control: NoSET CONFIG NOW CANCEL
