11-22 Administration GuideBinding Map Lists and Server ListsOnce you have created your map lists and server lists, for most Netopia Router models you must bind them toa profile, either a Connection Profile or the Default Profile. You do this in one of the following screens: the IP profile parameters screen (see below) of the Connection Profile configuration menu the IP Parameters (WAN Default Profile) screen (see page 11-24) of the Default Profile configuration menu the Binding Map Lists and Server Lists screen (see page 11-22)IP profile parametersTo bind a map list to a Connection Profile, from the Main Menu go to the WAN Configuration screen then theDisplay/Change Connection Profile screen. From the pop-up menu list of your Connection Profiles, choose theone you want to bind your map list to. Select IP Profile Parameters and press Return.The IP Profile Parameters screen appears.MainMenuWANConfigurationIP ProfileParametersDisplay/ChangeConnection ProfileIP Profile ParametersAddress Translation Enabled: YesIP Addressing... UnnumberedNAT Map List... Easy-PAT ListNAT Server List... Easy-ServersLocal WAN IP Address: 206.1.1.6Remote IP Address: 127.0.0.2Remote IP Mask: 255.255.255.255Filter Set... Basic FirewallRemove Filter SetRIP Profile Options...Configure IP requirements for a remote network connection here.
