15-8 Administration Guide Select GET ROUTER FIRMWARE FROM SERVER and press Return. You will see the following dialog box: Select CANCEL to exit without downloading the file, or select CONTINUE to download the file. The systemwill reset at the end of the file transfer to put the new firmware into effect. While the system resets, theLEDs will blink on and off.CAUTION! Be sure the firmware update you load onto your router is the correct version for your particularmodel. Some models do not support all firmware versions. Loading an incorrect firmware version canpermanently damage the unit.Do not manually power down or reset the Netopia 4752 while it is automatically resetting or it could bedamaged.If you choose to download the firmware, the TFTP Transfer State item will change from Idle to ReadingFirmware. The TFTP Current Transfer Bytes item will reflect the number of bytes transferred.Downloading configuration filesThe Netopia 4752 can be configured by downloading a configuration file using TFTP. Once downloaded, the filereconfigures all of the router’s parameters as if someone had manually done so through the console port.To download a configuration file, follow these steps: Select TFTP Server Name and enter the server name or IP address of the TFTP server you will use. Theserver name or IP address is available from the site where the server is located. Select Config File Name and enter the name of the file you will download. The name of the file is availablefrom the site where the server is located. You may need to enter a file path along with the file name (forexample, bigroot/config/myfile).+-----------------------------------------------------------++-----------------------------------------------------------+| || Are you sure you want to read the firmware now? || The device will reset when the transfer is complete. || || CANCEL CONTINUE || |+-----------------------------------------------------------+
