Security 13-1510. When you are finished configuring the filter, select ADD THIS FILTER NOW to save the filter in the filter set.Select CANCEL to discard the filter and return to the Add IP Filter Set screen.Viewing filtersTo display a view-only table of input or output filters, select Display/Change Input Filter or Display/ChangeOutput Filter in the Add IP Filter Set screen.Modifying filtersTo modify a filter, select Display/Change Input Filter or Display/Change Output Filter in the Add IP Filter Setscreen to display a table of filters.Select a filter from the table and press Return. The Change Filter screen appears. The parameters in thisscreen are set in the same way as the ones in the Add Filter screen (see “Adding filters to a filter set” onpage 13-13).Deleting filtersTo delete a filter, select Delete Input Filter or Delete Output Filter in the Add IP Filter Set screen to display atable of filters.Select the filter from the table and press Return to delete it. Press Escape to exit the table without deleting thefilter.Viewing filter setsTo display a view-only list of filter sets, select Display/Change IP Filter Set in the IP Filter Sets screen.Change FilterEnabled: NoForward: NoSource IP Address: 0.0.0.0Source IP Address Mask: 0.0.0.0Dest. IP Address: 0.0.0.0Dest. IP Address Mask: 0.0.0.0Protocol Type: 0Source Port Compare... No CompareSource Port ID: 0Dest. Port Compare... No CompareDest. Port ID: 0Enter the IP specific information for this filter.
