IPX Setup 12-5Note: The Default Gateway Address is usually set up to match the IPX Address in your network ConnectionProfile.8. To configure filters and filter sets, select Filters and Filter Sets and go to the IPX filters and filter setsscreens. For information on how to configure IPX filters and filter sets, see “IPX filters” on page 15-22.9. Select IPX Wan Pool Base Address and enter the first IPX network address to be allocated to requestingIPX WAN clients. The base address you enter must not conflict with other IPX networks assigned to your IPXinternet.IPX routing tablesIPX routing tables provide information on current IPX routes and services.To go to the IPX Routing Table screen, select IPX Routing Table in the Routing Tables screen. This table showsdetailed information about current IPX network routes.To go to the IPX SAP Bindery Table screen, select IPX SAP Bindery Table in the Routing Tables screen. Thistable shows detailed information about available IPX services and their location.MainMenu • IPX Routing Table• IPX SAP Bindery TableStatistics & LogsIPX Routing TableNet Addr-Hops-Ticks-Type--Status-Interface--------------via Router-----------------------------------------------SCROLL UP----------------------------------00000020 2 3 RIP Active Ethernet 00000120:00000c465c2f00000030 2 12 RIP Active Ethernet 00000120:00000c465c2f00000033 4 14 RIP Active Ethernet 000000120:00000c465c2f00000100 2 7 RIP Active Ethernet 00000120:00000c465c2f00000110 1 1 RIP Active Ethernet 00000120:00000c465c2f---------------------------------SCROLL DOWN-----------------------------UPDATE
