Easy Setup 7-9IP Easy SetupThe IP Easy Setup screen is where you enter information about your Netopia Router’s: IP address Subnet mask Default gateway IP address Domain name server IP address IP address serving information, such as the number of client IP addresses and the 1st client address; andYou should consult with your network administrator to obtain the information you will need. For more informationabout setting up IP, see “IP Setup and Network Address Translation” on page 11-1.1. Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has givenyou. This will be the Netopia Router’s IP address.If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Addressdefaults to an address within a range reserved by the Internet address administration authority for usewithin private networks, 192.168.1.1.Because this is a private network address, it should never be directly connected to the Internet. Using NATfor all your connection profiles will ensure this restriction. See “IP Setup and Network Address Translation”on page 11-1 of this guide for more information.2. Select Ethernet Subnet Mask and enter the subnet mask your ISP has given you. The Ethernet SubnetMask defaults to a standard class C mask, 255.255.255.0.3. Select Domain Name and enter the domain name your ISP has given you.4. Select Primary Domain Name Server and enter the IP address your ISP has given you.IP Easy SetupEthernet IP Address: 192.168.1.1Ethernet Subnet Mask: 255.255.255.0Domain Name:Primary Domain Name Server: 192.168.1.10Secondary Domain Name Server: 0.0.0.0Default IP Gateway: 0.0.0.0IP Address Serving: OnNumber of Client IP Addresses: 1001st Client Address: 192.168.1.3PREVIOUS SCREEN NEXT SCREENEnter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).Set up the basic IP & IPX attributes of your Netopia in this screen.
