14-2 User’s Reference GuideGeneral statusCurrent Date: The current date; this can be set with the Date and Time utility (see “Date and Time” onpage 8-14).Default IP Gateway: The router’s default gateway, which may be either manually configured or learned viaDHCP. This is the value you assigned in the Default IP Gateway field on page 7-10. If you are using the router’sdefaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway,it is shown here.CPU Load: Percentage of the system’s resources being used by all current transmissions.Unused Memory: The total remaining system memory available for use.Domain Name Server: If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If youhave assigned an IP address as your default gateway, it is shown here.Call Acct: Shows whether you have enabled or disabled the call accounting features.Domain Name: the domain name you have assigned, typically the name of your ISPMAC Address: The Netopia R3100’s hardware address, for those interfaces that support DHCP.IP Address: The Netopia R3100’s IP address, entered in the IP Setup screen.IPX Address: The Netopia R3100’s IPX address, entered in the IPX Setup screen.EtherTalk Address: The Netopia R3100’s AppleTalk address on its EtherTalk Phase II interface, entered in theEtherTalk Phase II Setup screen (only if the optional AppleTalk feature set is installed).LocalTalk Address: The Netopia R3100’s AppleTalk address on its LocalTalk interface, entered in the LocalTalkSetup screen (only if the optional AppleTalk feature set is installed).Quick View 8/13/1998 03:29:57 PMDefault IP Gateway: 163.176.8.1 CPU Load: 3% Unused Memory: 646 KBDomain Name Server: 163.176.4.31 Call Acct: DisabledDomain Name: netopia.com----------------MAC Address--------IP Address-------IPX Address---EtherTalk---Ethernet Hub: 00-00-c5-70-03-48 192.168.1.1 24:150Current WAN Connection StatusProfile Name----------Rate--%Use-Remote Address-----Est.-More Info------------LED StatusPWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------LNK RDY CH1 Ch2 LNK LNK LNK RDY CH1 CH2 DATA | '-'= Off 'G'= GreenG - - - - - - - - - - Y | 'R'= Red 'Y'= Yellow