16-6 User’s Reference GuideTo trace a route, follow these steps:1. Select Host Name or IP Address and enter the name or address of the destination you want to trace.2. Select Maximum hops (1..64) to set the maximum number of routers to count between the Netopia Routerand the destination router, up to the maximum of 64. The default is 30 hops.3. Select Timeout per probe (1..10 sec) to set when the trace will timeout for each hop, up to 10 seconds.The default is 3 seconds.4. Select Use Reverse DNS to learn the names of the routers between the Netopia Router and the destinationrouter. The default is Yes.5. Select START TRACE ROUTE and press Return. The screen will be replaced by a scrolling screen, listingthe destination, the number of hops, the IP addresses of each hop, and the DNS names, if selected.6. Cancel the trace by pressing Escape. Return to the Trace Route screen by pressing Escape twice.Secure Authentication MonitorNote: The Secure Authentication Monitor field will remain hidden if PAP-TOKEN or CACHE-TOKEN is not theselected authentication method in the Connection Profile.You use the Secure Authentication Monitor screen when placing one type of SecurID connection call. See“Connecting using security authentication” on page 15-39 for details.Trace RouteHost Name or IP Address:Maximum Hops: 30Timeout (seconds): 5Use Reverse DNS: YesSTART TRACE ROUTETrace route to a network host.