|
Easy Setup 7-3Beginning Easy SetupTo begin Easy Setup, select Easy Setup in the Main Menu, then press Return.The Easy Setup screen appears. For an IDSL router, skip to “IDSL Easy Setup” on page 7-6.ISDN Easy SetupNote: The ISDN Wizard is designed to automatically detect and configure most of your ISDN parameters for you,without your having to enter anything except a PBX dialing prefix, if you need one. The steps described in thissection allow you to either accept the detected values or override them in a manual mode if you want to. Assoon as the router is physically connected to the ISDN line and powered on, it tries to detect the switch type,directory numbers, and SPIDs. If it is successful, the screen above will be displayed with all the fields alreadyfilled in, except the PBX Prefix field.The Easy Setup Profile screen is where you configure the parameters that control the Netopia R3100’sconnection to a specific remote destination, usually an ISP or a corporate site.On a Netopia R3100 ISDN Router you can add up to 15 more connection profiles, for a total of 16.1. Select Circuit Type and press Return. From the pop-up menu, select:ISDN, Switched if you have a switched ISDN line. This option covers the broadest range of U and STapplications, and enables the ISDN Wizard automatic switch type and SPID detection for U interfaces anddefaults to Euro-ISDN for ST models, orISDN, Leased if you have a dedicated or leased (“nailed-up”) ISDN line that uses a single B channel (64K),2B (128K), or the entire ISDN bandwidth of 2B+D (144K), orIDSL, Ascend if your leased line service provider uses Ascend equipment (only available on U interfaces),orISDN Easy SetupCircuit Type... ISDN, SwitchedSwitch Type... National ISDN-1 (NI-1) DetectedDirectory Number 1: 5088324614 DetectedDirectory Number 2: 5088324615 DetectedSPID 1: 50883246141 PassSPID 2: 50883246152 PassPBX Prefix:Data Link Encapsulation... PPPTO MAIN MENU NEXT SCREENReturn/Enter to select ...Enter information supplied to you by your ISDN phone company.
|
