Stage 2. Running the Installation Wizard264 Netscape Certificate Management System Installation and Setup Guide • October 200126. Create Single Signon Password. Type the single signon password. The singlesignon password simplifies the way you subsequently sign on to CertificateManagement System by storing the passwords for the internal database,tokens, and so on. Each time you log on, you’re only required to enter thissingle password. (For details, see “Required Start-up Information” onpage 312.)Click Next to continue.27. Configuration Status. This screen should indicate that your configuration hasbeen successful.Click Done to exit the Installation Wizard.28. Proceed to the next step, “Stage 3. Enrolling for Administrator/AgentCertificate” on page 275, to create the first agent for the Data RecoveryManager.Installing a Online Certificate Status ManagerTo install a standalone Online Certificate Status Manager:1. Subsystems. Select Online Certificate Status Manager.Click Next to continue.2. Network Configuration. Type the numbers for the ports to be used by theCMS instance. Be sure to leave the “Enable” checkbox for the non-SSLend-entity port selected. The OCSP-compliant clients will use this port tocommunicate with the Online Certificate Status Manager.Click Next to continue.3. Key-Pair Information for Online Certificate Status Manager SigningCertificate. Select the token to store the Online Certificate Status Managersigning certificate and key pair. If you have not previously initialized thetoken’s password, you must do so in this screen. Also specify the key type andlength.Click Next to continue.4. Subject Name for Online Certificate Status Manager Signing Certificate.Type the values for the subject DN components; these values identify theOnline Certificate Status Manager’s signing certificate.Click Next to continue.
