Cloning a Certificate ManagerChapter 7 Installing and Uninstalling CMS Instances 291If you want to install your clone Certificate Manager on the same host on which themaster Certificate Manager is installed, but in a different server group:1. In the master Certificate Manager host machine, go to the directory thatcontains the CMS setup program.2. Run the setup program. For instructions, see “Stage 1. Running the InstallationScript” on page 219. Be sure to follow these guidelines:m When prompted to chose a server root or the location for the installation,specify a different directory/folder (than the one where the masterCertificate Manager is installed). For example, if your master CertificateManager is installed at /u/netscape/server4, you can specify/u/netscape/server4_clone1 as the server root for the clone instance.m When prompted to specify a configuration directory, select the option for anexisting directory and specify the host name and port number of theDirectory Server instance used by the master Certificate Manager.m When prompted to specify a port number for the Administration Server,be sure to specify distinct port number; each server group is managed by aseparate Administration Server. Note the port number as you will needthis later to log in to Netscape Console.Installing Clone CA on a Separate HostIf you want to install your clone Certificate Manager on a different host than theone on which the master Certificate Manager is installed, you should run the CMSsetup program on that host. For instructions, see “Stage 1. Running the InstallationScript” on page 219. (Note that you only need to complete Stage 1 and then proceedto “Step 3. Shutdown the Master CA” below.)Step 3. Shutdown the Master CAStop the master Certificate Manager. If you need instructions, see “StoppingCertificate Management System” on page 320.
