Page 46/112 GEO S12 HARDWARE SETUP PROCEDURE8.4 GEO S12 in touring applications8.4.1 Touring AccessoriesAccessories are :• Bumper (GEOS12-BUMPER)• Rigging Plates (GEOS12-XBOW-V2)• Tension Mode Link Bars for GEOS12-XBOW-V2 (GEOS12-TLB)• Lifting Ring for GEOS12-SSBRK, GEOS12-PSBRK or GEOS12-TTC (GEOS12-XHBRK)• Truss hook for GEOS12-SSBRK, GEOS12-PSBRK or GEOS12-TTC (GEOS12-TCBRK-V2)• “U” Bracket for single horizontal GEO S12 on pole stand, lifting ring or truss hook (GEOS12-SSBRK-V2)• U” Bracket for two horizontal GEO S12 on pole stand, lifting ring or truss hook (GEOS12-PSBRK-V2)• Flying Bar for single vertical GEO S12 (GEOS12-TTC-V2)• Ground Stacking device for up to 6 GEOS1210 (GEOS12-GSTK)Please refer to section 13.3 of this manual for more information of above references.GEOS12- BUMPER GEOS12-XBOW-V2GEOS12-TLB GEOS12-XHBRK GEOS12-TCBRK-V2GEOS12-SSBRK-V2 GEOS12-PSBRK-V2GEOS12-TTC-V2 GEOS12-GSTK
