NiceUC NC-AD300E User Manual
                                                                | |
Contents
| 
NC-AD300E Manual- 17 -0x80 - load the boot image from tftp.0x100 - use proxy arp service.0x200 --0x400 – load from ftp to boot0x800 - manually set the MAC address.0x1000 - start the DHCP service.0x2000 - use watchdog.target name (tn): e3 can be freely modifiedstartup script (s): must be emptyother (o): must be emptyDeviceID: 0x0 can be freely modifiedNote that the modification will be effect after re-start up.4.4 Device IP Address4.4.1 View IP addressA) ipconfigUse the ipconfig command to query the device IP address for the primary user. Examples areas follows-> Ipconfigip = 192.168.16.100: ffff0000the device IP address "192.168.16.100", the subnet mask for the hexadecimal form converted todecimal as "255.255.0.0".B) ifconfigUse ifconfig command to query the device IP address for the primary user. Examples are asfollows-> Ifconfigip = 192.168.16.100: ffff0000the device IP address "192.168.16.100", the subnet mask for the hexadecimal form converted todecimal as "255.255.0.0".C) ifShowUse ifShow command to view the device details of network parameters for advanced users.Examples are as follows-> IfShowat (unit number 0):Flags: (0x8063) UP BROADCAST MULTICAST ARP RUNNINGType: ETHERNET_CSMACDInternet address: 192.168.6.100Broadcast address: 192.168.255.255Netmask 0xffff0000 Subnetmask 0xffff0000Internet address: 200.0.6.99 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine