NiceUC NC-AD300E User Manual
                                                                | |
Contents
| 
NC-AD300E Manual- 22 -a computer's hard drive, RAM is the computer flash memory, can only choose one of them.5.1.4 Write device parametersAfter a successful connection, point Button or in the "Device" menu, select "Write."If you write to the success of all the parameters will be prompted to write to finish.Write operations, you need to pay attention "to read and write target" option. Write ROMdata is not lost after power-down, write RAM data will be lost after power-down, but someparameters can take effect immediately (without restarting equipment with immediate effect). alsoproposes to select the ROM and RAM in the same time for write operation.ć5.1.5 Load ParametersDevice parameters can be saved as a text file form. The text file can be loaded into the device,commonly used to restore the backup configuration. Point Button or in the "File" menu,select "Import."Note that the import operation is just the parameters loaded into the buffer configurationtool,and not written to the device.5.1.6 Export ParametersDevice parameters can be saved as a text file. This is mainly for the back up the configurationof the devices. Click Button or in the "File" menu, select "Export."Note, remember to read the the device configuration before do the export action.5.1.7 Reset DeviceClick Button or in the "Device" menu, select "Reset", the equipment can be reset.When modify parameters, it is recommended to read out the parameters of the device and importto back up first, and try to back up for each modification to avoid mistake and can not berecovered. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine