NiceUC NC-AD300E User Manual
                                                                | |
Contents
| 
NC-AD300E Manual- 47 -Every number correspondence a group number,and you can not only increase single,but alsobatch. Click right menu operation,to support load numbers from the files.After add CDB numbers, you can reference them in the routing and convert rule tables.As frist , you must add a virtual rule that SID format is “cdb,xx” ,xx means character length,If you want to match that figure above 8-bit word length of crown number,and then add the actualnumber.When device are searching crown number, if there have vitural rules, then it willAfter completion of editing, write to ROM and RAM for effective.Chapter 6 Calling detail recordsAD300E send out the CDR through net port. For receiving CDR, other software need to run.For set up the destination of the CDR goes to “SysPart”The original format of CDR is text strings, each one with "R" at the beginning and "\ r \ n" at theend. With a space between each text string separated by fixed length, if the text string is not longenough, will add the space to this fixed length, in the text string, there are four kinds of line types, 0 isE1,1 is analog line, 2 is lines, 3 is wireless lines. Call duration is seconds.There are three formate of CDR, 1, 2 and 101 which are shown below:Format 1 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine