Nidec SI-Interbus 500 kBd User Manual
                                                                                          | |
Contents
| 
72 SI-INTERBUS User GuideIssue Number: 113 Single line setup parameter descriptionsTable 13-1 Setup menuPr Function Deafult ValueMM.001 Option Module ID Code 404 (500 kBd) or 414 (2 MBd)MM.002 Firmware Version Vww.xx.yy.zz -MM.005 Interbus Data Format (Mode) 4 (4 cyclic words)MM.006 Interbus Operating Status -MM.007 Network Loss Trip Timeout (ms) 200 (ms)MM.009 Direct Data Mapping Enabled Off (disabled)MM.010 Cyclic Input 1 Mapping 1040 (Status word Pr 10.040)MM.011 Cyclic Input 2 Mapping 201 (Post Ramp Reference Pr 2.001)MM.012 Cyclic Input 3 Mapping 0 (Disabled)MM.013 Cyclic Input 4 Mapping 0 (Disabled)MM.014 Cyclic Input 5 Mapping 0 (Disabled)MM.015 Cyclic Input 6 Mapping 0 (Disabled)MM.016 Cyclic Input 7 Mapping 0 (Disabled)MM.017 Cyclic Input 8 Mapping 0 (Disabled)MM.018 Cyclic Input 9 Mapping 0 (Disabled)MM.019 Cyclic Input 10 Mapping 0 (Disabled)MM.020 Cyclic Output 1 Mapping 642 (Control word Pr 6.042)MM.021 Cyclic Output 2 Mapping 121 (Preset Reference 1 Pr 1.021)MM.022 Cyclic Output 3 Mapping 0 (Disabled)MM.023 Cyclic Output 4 Mapping 0 (Disabled)MM.024 Cyclic Output 5 Mapping 0 (Disabled)MM.025 Cyclic Output 6 Mapping 0 (Disabled)MM.026 Cyclic Output 7 Mapping 0 (Disabled)MM.027 Cyclic Output 8 Mapping 0 (Disabled)MM.028 Cyclic Output 9 Mapping 0 (Disabled)MM.029 Cyclic Output 10 Mapping 0 (Disabled)MM.030 Load Module Defaults Off (0)MM.031 Store Option Parameters Off (0)MM.032 Module Reset Off (0)MM.033 Restore Saved Option Parameters Off (0)MM.034 Data Compression Enable Off (0)MM.035 Serial Number LS -MM.049 Cyclic Data Mapping Status 0 (No errors)MM.050 Module Error Status -MM.052 Background Cycles per Second -MM.053 PCB Temperature - |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine