52More on PlaybackViewing Pictures on TVThe EG-CP14 audio / video (A / V) cable included with the camera can be usedto connect the camera to a television or video-cassette recorder (VCR).Choosing a Video ModeThe Video mode item in the setup menu offers a choice of NTSC and PAL( 99). Be sure that the mode selected matches the standard used in thevideo device.1 Turn the camera offTurn the camera off before connecting or disconnecting the A / V cable.2 Connect the A / V cableOpen the interface connector cover as shown atright and insert the black plug into the camera’sinterface connector. Insert the yellow plug into thevideo-in jack on the television or VCR. Connect thewhite plug to the audio-in jack.3 Tune the television to the video channelIf in doubt, consult the documentation for your television or VCR.4 Turn the camera onPress the button for about a second to turn the camera on. The cameramonitor will remain off and the television will show the image normallyshown in the monitor.PALIf PAL is selected for Video mode and the camera connected to a video device, videooutput will be suspended and the camera monitor or electronic viewfinder will turn onwhen the camera is in movie mode.
