149Basic Camera Setup: The Setup MenuShooting, Playback and Setup Menusd Blink WarningSet whether or not to detect human subjects with eyes closed when shootingpictures using face priority (A123) in any mode other than a smile timer/y blinkproof (A54).B Notes on Blink Warning• The camera does not perform blink warning in the following cases.- When a (smile timer) (A54) is used- When Continuous, BSS, Multi-shot 16 or Intvl timer shooting is selected for Continuous- When focus mode is set to p (macro close-up)• When y (blink proof ) is used for shooting, the setting for Blink warning is ignored and wheneversmiling faces are detected, the camera takes two pictures and chooses an image in which thesubjects’ eyes are open.Press the d button M z (Setup menu) (A135) M Blink warningOn (default setting)When the camera detects that one or more human subjects have closed their eyesshortly after recognizing the faces and shooting them, the Did someone blink?screen will appear on the monitor.The face of the human subject that may have closed his/her eyes is framed by ayellow border. You can check the picture taken and determine if you need to takethe picture again.See “Operating the Did someone blink? Screen” (A150) for more information.OffBlink warning doesn’t take effect.