16First StepsCharging the Battery Using the AC Adapter (COOLPIX S610c)If you are using the COOLPIX S610c, insert a Rechargeable Li-ion Battery EN-EL12(supplied) into the camera and charge the battery by connecting the AC AdapterEH-63 (supplied).1 Connect the power cable and AC adapter 1.2 Confirm that the power-on lamp and themonitor are off.Do not turn the camera on. The battery cannot becharged when the camera is on.3 Connect the AC adapter to the camera’s multi connector 2.The multi connector should be fully inserted.4 Plug the power cable into an outlet 3.The AC adapter power-on lamp will light 4.C Charging the Battery After Setting the Camera’s ClockWhen the camera’s built-in clock has not been set, the battery begins charging when the ACadapter is connected. Once the clock is set and the AC adapter is connected, the Picture Bankstart-up screen will be displayed and the camera will attempt to upload pictures to the myPicturetown server. Press the k button to cancel picture upload and charge the battery.Picture Bank can be set so that it does not start automatically when the AC adapter isconnected. See the Wireless LAN Connection Guide for more information about Picture Bank.5 The battery begins charging.The power-on lamp (orange) will blink, and the battery willstart charging.The power-on lamp (orange) stops blinking when chargingis complete.A fully exhausted battery will recharge in about 150 minutes.3421
