126Connecting to Televisions, Computers and PrintersConnecting to Televisions, Computers and PrintersConnecting to a TVConnect the camera to a television using the supplied audio/video cable to playback pictures full-frame or in a slide show, or to play back movies, on a television.1 Close the slide cover to turn off the camera.2 Connect the camera to the TV using the supplied A/V cable.Connect the yellow plug to the video-in jack, and the white plug to the audio-in jack onthe TV.3 Tune the television to the video channel.See the documentation provided with your television for details.4 Open the slide cover to turn on the camera.Tap c to switch to playback mode. Pictures aredisplayed in the camera monitor and on the television.Pictures cannot be displayed on the television when thecamera is in shooting mode or the setup menu isdisplayed in camera monitor.B Connecting the CableWhen connecting the cable, be sure that the camera connector is properly oriented. Do not use forcewhen connecting the cable. When disconnecting the cable, do not pull the connector at an angle.B Video ModeBe sure that the camera’s video mode setting conforms to the standard used by your television.The video mode setting is specified from the Video mode (A 151) option in the setup menu (A 139).WhiteYellow
