133Setup MenuBasic Camera Setupk Auto OffWhen the camera is on and a period of time passes without any operations havingbeen performed, the monitor will be turned off and the camera will enter standbymode (A 17) to save power. Once the camera has entered standby mode, thepower-on lamp will blink, and if no operations are performed for another threeminutes, the camera will turn off.Choose the time allowed to elapse before the camera enters standby mode if nooperations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.C Canceling Standby ModeCancel standby mode and reactivate the monitor by pressing any of the following buttons.• the power switch• the shutter-release button• the A button• the c button• the b (movie-record) buttonC Notes on Auto OffThe time allowed to elapse before the camera enters standby mode is fixed in the followingsituations:• When a menu is displayed: If auto off is set to 30 s or 1 min, it is extended to three minutes.• During slide show playback: up to 30 minutes• When the AC adapter EH-62F is connected: 30 minutesd button M z (Setup menu) (A 121) M k Auto off
