63More on ShootingShooting Smiling Faces (Smart Portrait Mode)At the default settings, the camera uses face priority to recognize human faces,and then automatically releases the shutter when a smile is detected (smile timer).The skin softening option can be used to smooth skin tones of human faces.1 Press the A button in shootingmode to display the shooting-mode selection menu, use therotary multi selector to select F,and press the k button.The camera enters smart portrait mode.2 Frame a picture.Point the camera at the subject.When the camera recognizes a human face, a yellowdouble border (focus area) is displayed around that face.When focus is acquired on that face, the double borderwill turn green for a moment and focus is locked.Up to three faces can be recognized. When the cameradetects more than one face, the double border is displayed around the face closest tothe center of the frame, and single borders around the others.3 The shutter is automatically released.If the camera detects that the face framed by the double border is smiling, Smile timer(A 65) is activated and the shutter is automatically released.When the camera recognizes a face, the self-timer lamp (A 4) blinks. Immediately afterthe shutter is released, the self-timer lamp flickers. Each time the shutter is released, thecamera again initiates face recognition and smile detection operations for continuousautomatic shooting.Pictures can also be taken by pressing the shutter release button. The camera can focuson the subject at the center of the frame when faces are not recognized.When the shutter is released, the camera softens the subject’s skin to make it appearsmoother and then records the image (Skin softening A 65).4 Shooting ends.To stop automatic shooting of smiling faces, either turn the camera off, set Smile timerto Off, or press the A button and select another shooting mode.Smar t por traitF 3.7F 3.71 / 2 5 01 / 2 5 0
