14First StepsCharging the BatteryCharge the supplied Rechargeable Li-ion Battery EN-EL12 inserted into thecamera, by connecting the supplied Charging AC Adapter EH-68P to the cameravia the supplied USB Cable UC-E6, and then plugging the Charging AC Adapterinto an electrical outlet.1 Prepare the Charging AC Adapter EH-68P.If a plug adapter* is included, attach the plug adapter to the plugon the Charging AC Adapter. Push the plug adapter firmly until it issecurely held in place. Once the two are connected, attempting toforcibly remove the plug adapter could damage the product.* The shape of the plug adapter varies according to the country orregion in which the camera was purchased.For Customers in ArgentinaIf the camera was purchased in Argentina, the shape of theCharging AC Adapter EH-68P (AR) differs from that supplied in othercountries, and a plug adapter is not included. Proceed to step 2.2 Be sure that the power-on lamp and the monitor are off.Be sure to insert the battery into the camera (A 12) and turn off the camera (A 17).3 Use the supplied USB cable to connect the Charging AC Adapter to thecamera.B Connecting the CableWhen connecting the cable, be sure that the connector is properly oriented. Do not use force whenconnecting the cable to the camera. When disconnecting the cable, do not pull the connector at anangle.EH-68P (AR)USB cable