![Nikon CoolPix S620 User Manual Manual pdf 152 page image](https://manuals-archive2.s3.amazonaws.com/3960373/6ddb1ef1bece56ecd634ed0094441de1152f.jpg)
140Technical NotesTroubleshootingIf the camera fails to function as expected, check the list of common problemsbelow before consulting your retailer or Nikon-authorized service representative.Refer to the page numbers in the right-most column for more information.Display, Settings and Power SupplyProblem Cause/Solution AMonitor is blank.• Camera is off.• Battery is exhausted.• Standby mode for saving power: press the power switchor the shutter-release button.• When flash lamp blinks red, flash is charging. Wait untilcharging has finished.• Camera and computer are connected via USB cable.• Camera and TV are connected via audio/video cable.• Interval timer photography in progress.172213, 1731777696Monitor is hard to read.• Adjust monitor brightness.• Monitor is dirty. Clean monitor.• Use monitor brightness boost.11713223Camera turns offwithout warning.• Battery is exhausted.• Camera has turned off automatically to save power.• Battery is cold.22122133Date and time ofrecording are notcorrect.• Pictures recorded before clock was set, and “Date not set”indicator blinks during shooting, will have time stamp of“00/00/0000 00:00”; movies and voice recordings will bedated “01/01/09 00:00.” Set the correct date and timeusing Date in the setup menu.• Check camera clock regularly against more accuratetimepieces and reset as required.18, 114114No informationdisplayed in monitor.Hide info is selected for Photo info of the Monitorsettings option in the setup menu. 117Date imprint notavailable. Date has not been set. 18, 114Date not appearing onpictures even whenDate imprint isenabled.The date is not imprinted on movies or on pictures taken inPanorama assist scene mode. 46, 68, 118Camera settings reset. Backup battery is exhausted; all settings were restored totheir default values. 115Monitor turns off, andthe power-on lampblinks rapidly.Battery temperature is high. Turn off camera, and allowbattery to cool down before resuming use. After the lampblinks for three minutes, the camera will turn offautomatically, but you can also press the power switch toturn it off manually.17