E39Reference SectionSet Time zone and date (E97) correctly before using the location datafunctions.1 Set Record location data to On.• After the settings are complete, press thed button or shutter-release button to exitthe menu.• To receive signals easily, operate in an open-air area.2 Check the location datareception on the shootingscreen.• n or o: Signals are beingreceived from four or more satellites,or from three satellites, andpositioning is being performed. Thelocation data is recorded on theimage.• z: Signals are being received, but positioning is not possible. If the locationdata was obtained within the last one minute, it is recorded on the image.• y: Signals are not received. The location data is not recorded on the image.3 Shoot images while positioning is being performed.• The location data is recorded on shot images.• The recorded location data can be checked on a map with ViewNX 2 aftertransferring the image to a computer (E53).Recording the Location Data on the ImagePress the d button M z menu icon M Location data options M kbuttonOffOnRecord location datamm 00 ssF5.6F5.6 8408402525 mm 00 ssF5.6F5.61/2501/250Location data reception
