E7Reference SectionB Notes About HDR• Use of a tripod is recommended. Set Vibration reduction in the setup menu(A57) to Off when using a tripod to stabilize the camera.• When the shutter-release button is pressed all the way, the camera shoots imagescontinuously and saves the following two images.- A non-HDR composite image- An HDR composite image in which the loss of details in highlights or shadows isminimized• If there is only enough memory to save one image, an image processed by D-Lighting (A55) at the time of shooting, in which dark areas of the image arecorrected, is the only image saved.• Once the shutter-release button is pressed all the way, hold the camera still until astill image is displayed. After taking a picture, do not turn the camera off before themonitor switches to the shooting screen.• The angle of view (i.e., the area visible in the frame) seen in the saved image isnarrower than that seen in the monitor at the time of shooting.• Depending on the shooting conditions, dark shadows may appear around brightsubjects and bright areas may appear around dark subjects.y M o Backlighting• On the screen displayed when o Backlighting is selected, select On or Off toenable or disable the high dynamic range (HDR) function based on the type ofimage you want to capture.• Off (default setting): The flash fires to prevent the subject from being hidden inshadow. Shoot images with the flash raised.• On: Use when taking pictures with very bright and dark areas in the same frame.
