E43Reference SectionB Notes About Log Recording• If the date and time are not set, the log cannot be recorded.• Use a fully charged battery to prevent the camera from turning off during logrecording. When the battery power becomes exhausted, log recording ends.• Even when the camera is turned off, log recording is continuously performed untilthe preset time has elapsed if there is still time remaining for log recording.• Log recording ends due to the operations below even when there is timeremaining for log recording.- The battery is removed- Record location data in Location data options is set to Off- Reset all in the setup menu is performed- The setting of the internal clock (time zone or date and time) is changed- End log is selected in Create log of the location data options menu (E44)• Log recording is paused during the operations below.- During continuous shooting- During movie recording- When connected with a USB cable or HDMI cableLog recording is resumed when the above operations are finished.• The log data cannot be recorded when positioning cannot be performed at allduring log recording.• After recording log data, save it to a memory card (E44). New logs cannot berecorded if the log data remains in the camera.
