170Menu Guide—Custom SettingsCustom settings are used to fine-tune a variety of camera settings to suit theuser’s preferences, creating combinations of settings that differ from the fac-tory defaults in effect at the time your camera was purchased. In addition toCustom Settings C (Bank select) and R (Menu reset), settings in the CSM(Custom Settings) menu are divided into the following six groups:Custom Settings Fine-Tuning Camera SettingsPress the multi selector up or down to highlightthe desired group and then press the multi se-lector to the right. The full list of Custom Set-tings a1–f7 will be displayed, starting with thesettings in the selected group. To select a settingin a different group, press the multi selector up ordown scroll until the desired setting is displayed,or press the multi selector to the left to return thetop menu and select a different group. Custom Setting a1 (AF-C mode pri-ority) and f7 (No CF card?) are linked: pressing the multi selector up whenCustom Setting a1 is highlighted displays Custom Setting f7, while pressingthe multi selector down while Custom Setting f7 is highlighted displays Cus-tom Setting a1.Using the Multi SelectorThe multi selector can be used at any time when the monitor is on. The focus selectorlock switch only takes effect when the monitor is off.ABank selectMenu resetAutofocusMetering/ExposureTimers/AE&AF LockShooting/DisplayBracketing/FlashControlsCSM MENUCRabcdefGroup Custom SettingsAutofocus a1–a8Metering/Exposure b1–b6Timers/AE&AF Lock c1–c5Shooting/Display d1–d7Bracketing/Flash e1–e8Controls f1–f7abcdefONOFFONa1a2a3a4a5a6a7a8AF-C mode priorityAF-S mode priorityGroup dynamic AFDisable Lock-OnAF activationFocus area IllumFocus areaVertical AF-ONCSM MENU
