231Menu Guide—The Setup MenuNetwork SettingsAdjust network settings for connection to theserver. Press the multi selector up or down tohighlight an option and then press the multi se-lector to the right.Option DescriptionLoadsettings file?Load Wireless, TCP/IP, and FTP set-tings from camera memory card.Wireless Adjust settings for connection to wire-less network.TCP/IP Adjust TCP/IP settings, including IP ad-dress, DNS, and gateway settings.FTP Enter password and user ID and adjustsettings for connection to ftp server.Image AuthenticationSelecting On for this option embeds image au-thentication information into photographs as theyare taken, allowing alterations to the image to bedetected using Nikon’s optional Image Authenti-cation software ( 250). To turn image authenti-cation on or off, highlight Image authenticationin the setup menu ( 213) and press the multi selector to the right. Press themulti selector up or down to highlight an option and press the multi selectorright to select. Photographs taken with image authentication on are markedby a icon on page 2 of the playback information display ( 139).Image TransferModifications to color profiles or IPTC information made in PictureProject duringtransfer will be detected by Nikon’s Image Authentication software. Turn auto embedoptions off when transferring photographs for use with Image Authentication. Imageauthentication information is not embedded in TIFF photographs recorded directly to acomputer using Camera Control Pro (available separately).CopiesImage authentication information is not embedded in copies created with Trim (123) or Image overlay ( 118).
