232Menu Guide—The Setup MenuSave/Load SettingsSelect Save settings to save all camera settingsexcept the date and time ( 17) and monitorbrightness ( 215) to the camera memory card.Saved settings can be restored by selecting Loadsettings. To turn save or load settings, highlightSave/load settings in the setup menu ( 213)and press the multi selector to the right. Press the multi selector up or downto highlight an option and press the multi selector right to select. Note thatthis option is unavailable when no memory card is inserted in the camera.The Load settings option will be unavailable if the current memory carddoes not contain saved settings.Firmware VersionTo display the current camera firmware version,highlight Firmware version in the setup menu( 213) and press the multi selector to the right.Press the multi selector to the left to return to thesetup menu.Saved SettingsSettings are saved to a file named “NCSETUP0” on the camera memory card. Deletingor modifying this file will prevent the camera from loading the saved settings.
