235Connections—Connecting to a Computer* Mac OS X version 10.3.9 or later required for Camera Control Pro.† Do NOT select PTP. If PTP is selected when the camera is connected, the Windowshardware wizard will be displayed. Click Cancel to exit the wizard, and then discon-nect the camera. Be sure to select Mass storage before reconnecting the camera.Operating system PictureProjectWindows 2000 ProfessionalChooseMass Storage †Camera Control ProWindows XP Home EditionWindows XP Professional Choose PTP orMass StorageMac OS X * Choose PTPWindows Millennium Edition (Me)Windows 98 Second Edition (SE) Not supportedConnecting to a ComputerData Transfer and Camera ControlThe supplied UC-E4 USB cable can be used to connect the camera to a com-puter. Once the camera is connected, PictureProject can be used to copyphotographs to the computer, where they can be browsed, viewed, andretouched. The camera can also be used with other applications availableseparately from Nikon, including Capture NX, which supports batch process-ing and more advanced image editing options, and Camera Control Pro,which can be used to control the camera directly from the computer.Before Connecting the CameraInstall the necessary software after reading the manuals and reviewing thesystem requirements. To ensure that data transfer is not interrupted, be surethe camera battery is fully charged. If in doubt, charge the battery before useor use an EH-6 AC adapter (available separately).Before connecting the camera, set the USB optionin the setup menu ( 220) according to the com-puter operating system and the software used:The USB Cable ClipTo prevent cable from being disconnected, fasten the clip as shown.DC IN
