The camera supports a variety of flash modes for photographing poorly lit or backlit subjects. The flash modes available depend on the mode selected with the mode dial; notethat the flash can not be used in _, _, or [] mode. The default flash setting for Digital VariProgram modes is automatically restored when the mode dial is rotated to a new setting orthe camera is turned off.Using the Built-in Flesh: A_o_, ._, _ end _ Modes1 Rotate the mode dial to *uT°_,_:__,"_',_'_Ta,== or_.2 Choose a flash mode.,3 Take pictures. Unless @ (off) is selected, the flash will pop upas required when the shutter release button is pressed halfwayand fire when a photograph is taken.Using the Built-in Flesh: R S,,4, end M Modes1 Rotate the mode dial to P,S,A, or M.2 Pressthe O button to raise the flash.3 Choose a flash mode.4 Choosea metering method and adjust exposure.Take pictures. The flash will fire whenever a picture istaken. To prevent the flash fromfiring, lower the flash.Lowering the Built-in FlashTo save power when the flash is not in use, press it gently downward until the latch clicksinto place.34 Reference:Moreon Photography(All Modes)/Usingthe Built-in Flash
