to a Compute Printer, or 7VThe camera can be connected to a computer using the supplied USBcable. The suppliedPictureProject software can then be used to copy photographs to the computer, wherethey can be organized, retouched, and printed.Before Connecting the CameraInstall PictureProjectfrom tile supplied installer CD. Toensure that data transfer is not interrupted, be sure the camera battery is fully charged. If in doubt, charge the battery beforeconnecting the camera or use an optional EH5 AC adapter and EP5 AC adapter connectorBeforeconnecting the camera, select the USB item in the camerasetup menu and choose a USBoption as described below.Computeroperatingsystem USBWindows XP Home EditionWindows XPProfessional Choose PTP or Mass StorageMac OSX version 10.3.9or laterWindows 2000 Professional Choose Mass Storage _Do NOTsdect PTP. If PTP issdected when the camera is connected, theWindows hardware wizard will be displayed. Click Cancel to exit thewizard, and then disconnect the camera and select Mass Storage,Connecting the USB CableTurn the computer on and wait for it to start up.2 Turn the camera off.Connect the supplied USB cable as shown. Do not use force or attempt to insert theconnectors at an angle. Connect the camera directly to the computer; do not connectthe cable via a USB hub or keyboard.Reference:Connectingto a Computer,Printer,or TV/Connectingto a Computer 55