Custom Settings07 Image Review (Displayed When Full Is Selected; I_ 118)If On (default setting) is selected, photographs will automatically be displayed in themonitor after shooting. The length of time photographs are displayed depends on theoption selected for Custom Setting 15 (Auto off timers; [] 114). If Off is selected,photographs can be displayed in the monitor by pressing []L].09 AF-assist (Displayed When Full Is Selected; I_ 118)If On (default setting) is selected and the subject is poorly lit, the AF-assist illuminator willlight when required to assist the focus operation ([] 57). Choose Off to disable the AF-assist illuminator. Note that when the illuminator is off, the camera may not be able tofocus on poorly-lit subjects using autofocus.10 ISO Auto (Displayed When Full Is Selected; I_ 118)Choose whether the camera automatically adjusts ISO sensitivitywhen optimal exposure cannot be achieved at ISO sensitivityselected by the user. ISO auto can be used with the flash. Availablein P, S, A, and M modes.Off (default setting)OnISOsensitivity will automatically be adjusted if optimal exposure cannot be achieved atthe selected value (flash level is adjusted appropriately).Photographs taken at higher ISOsensitivities often appear "grainy".Choose the maximum ISOsensitivity to prevent ISOauto from increasing tile ISOsensitivity setting too much. ISOauto will not raiseISOsensitivity above the selectedvalue.Minl shutter speedChoose the shutter speed at which ISOauto takes effect in modes P and A. In modesP and A, sensitivity will only be adjusted if underexposure would result at the shutterspeed selected for this option (slower shutter speeds may be used if optimal exposurecannot be achieved at tile value selected for maximum sensitivity).¢bt-t-O_¢b111
