Select Flash compensation from the Quick settings display to adjust the setting (_'_ 48).Flash compensation (available only in P, S, A, and M modes) is used to alter flashoutput, changing the brightness of the main subject relative to the background. Flashoutput can be increased to make the main subject appear brighter, or reduced to preventunwanted highlights or reflections.Flash compensation is shown in the Shooting information display. 1_ _ _,c,Normal flash output can be restored by setting flash compensation to 0.0. Flash exposurecompensation is not reset when the camera is turned off.Flash compensation is also available with optional SB-400, SB-800, SB-600 (_'_ 150), andSU-800 flash units (_'_ 1_50).m,oom,[] Using the Command DialFlashcompensation carl also be adjusted by from -3 EVto +1 EVin increments of 1/3EV,by rotating tilecommand dial while pressing _ (_'_-_)and [_-_.Checkthe desired value shown in tile viewfinder or Shootinginformation display. The viewfinder display isillustratedat right.4- 4--3.0 EV+0.7EV8--Flash CompensationFlash compensation carl also be adjusted from the Custom Settings menu ([] 109).68
